Ledwholesalers 16.4 Ft RGB Color Changing Kit with LED Flexible Strip, 44 Button Do It Yourself Controller + Remote and Power Supply, 2034rgb Kit
|Ledwholesalers 16.4 Ft RGB Color Changing Kit with LED Flexible Strip, 44 Button Do It Yourself Controller + Remote and Power Supply, 2034rgb Kit|
Controller: Input Voltage: 12V Output Voltage: 12V 2A each color max Wall mount power supply: Input Voltage: 100V-240V ~50/60Hz Output Voltage: 12V 4A Operating Temperature: -20~60 ? Item included: 5m 150pcs. 5050 SMD RGB LED Strip x 1 AC power supply unit x 1 (Standard US Plug) LED IR Controller set x 1
These light strips are fantastic! The kit will come with everything needed to get up and running; the power supply, light strip, controller, and remote. The LED strip ribbon can be cut after every three LEDs, you'll just have to solder the four leads on (or purchase the $2.00 lead) in order to connect a power supply/controller to them again. The strip contains an adhesive backing for mounting to virtually any dry surface. On one end you have the plug wired in for you to connect to the controller, on the other side there is already four leads attached for you if you would like to purchase a driver to hard wire into the strip.
These little LEDs are very bright! I can't imagine what the super bright LEDs available would be like! The remote control includes 16 brightness levels, a strobe effect albeit very slow, and smooth transition from color to color, and fade transition from color to color, and a flash mode. There are 15 colors to choose from from the RGB spectrum. The remote is small and light weight (about the size of a credit card but about 1/4" thick) and runs off of a common CR2025 battery. The range of the remote is about 15-20 feet.
The only problem that arose while testing the kit is with the remote. The color spectrum on it isn't the same as what the LED strip projects. For instance, when you press the Green button the LEDs light up Blue or press the Blue button and the LEDs project Green. The Red spectrum controls the Blues, the Blue spectrum controls the Reds, but at least the Green spectrum still controls the Greens :)
Overall I'm very excited and pleased with these lights. I'm using the first kit for shadow lighting for under my bar I'm building. I intend on purchasing more kits for walkway lighting in our Home Theater and also for accent lighting in our kitchen, office, and bathrooms.
LEDWholesalers. It was better than I expected (in terms of quality of materials, brightness of LEDs, and ease of installation.) One thing of note, they sent me the waterproof version (which typically is a little more expensive) even though I ordered the standard version. The problem with the waterproof version is that the 3M double sided tape included does not adhere very well to the clear plastic covering. Because I did not need my lights to be waterproof, I cut off the plastic and installed the LED strips with the 3M tape adhered directly to the back side of the strip (instead of to the plastic covering.) I used drywall screws to secure the controller and power supply inside a cabinet, and had a beautiful finished project. One thing I was surprised with, is that the controller actually has a memory -meaning when you choose the color of light, or pattern that you want to display, if you cut the power to the unit (by unplugging the power supply, or in my case, by flipping the wall switch that I installed) -When power is restored to the unit, it resumes displaying the color or pattern that you had chosen prior to powering down. This is an awesome feature because once you have your display set up the way you want it, you don't have to reset it every time you kill the power.